Automatic Configuration
Automatically configures the camera & streaming settings and imports the XML profile directly from the WCC unit (no downloads or file transfers necessary). Then it’s ready to go.
ATOMIC IMAGINGPurpose-built for the Blackmagic URSA Broadcast G2 camera and Blackmagic ATEM switchers (all models) for Multi-Cam live production.
Wireless camera Tally, Iris, and Camera Control via ATEM Software Control and/or ATEM Camera Control Panels. All through one USB-C connection to the camera—no separate power supply required.
Automatic camera configuration. Plug and play once the unit joins the same production Wi‑Fi network as your ATEM switcher.
Runs standalone—no additional computer or software required. The optional web-based GUI provides diagnostics, individual and global Remote Recording, Clean Feed, False Color, and camera preview with Waveform and Vectorscope options.
View multiple units in one GUI, hosted by a WCC unit or a computer (works on both Mac and PC). Both GUIs also provide recording, Clean Feed, and False Color controls for cameras hardwired to the ATEM, across supported outputs.
BUILT FOR WIRELESS HANDHELD OPERATION
Handheld operators can’t hold a shot indefinitely. Clear Tally lets them know when they’re live—and when they can reposition.
Atomic WCC complements URSA Broadcast G2 cameras using wireless video systems such as Teradek Bolt. Bolt carries video to the switcher; WCC provides the return Tally, Iris, and Camera Control.
AUTOMATIC SETUP. OPTIONAL CONTROL.
Automatically configures the camera & streaming settings and imports the XML profile directly from the WCC unit (no downloads or file transfers necessary). Then it’s ready to go.
Use ATEM source names or set your own camera labels.
Monitor connections, signal strength, address conflicts, and camera assignments in one GUI.
THE ADJUSTMENTS THAT MATTER
Adjust supported camera settings from the control position while the camera operator concentrates on framing.
Note: Iris operation depends on the lens and camera configuration.
FROM SETUP TO SHOWTIME
Mount the unit and connect it to the camera’s rear USB-C port.
Use Config Wi-Fi to select your production network. Connect the ATEM to that network by Ethernet.
Find your switcher, match the Camera ID, and apply. Camera configuration and streaming start automatically.
Note: Video transport and talkback require separate devices.
CHOOSE THE RIGHT CONNECTION
| Approach | Where it fits | Why choose Atomic WCC? |
|---|---|---|
| SDI return control | Wired return video and Camera Control. | Wireless Tally and Camera Control without an SDI return cable. |
| Streaming Bridge workflow | Decode supported video streams to SDI/HDMI. | Dedicated camera-side Wi-Fi control; video transport remains separate. |
| Middle Things APC-R | Networked DJI gimbal control and supported Blackmagic Camera Control through Middle Control. | Direct URSA Broadcast G2 + ATEM control, with no separate control computer required. |
Alternative product references: Blackmagic Design · Middle Things. Features and requirements vary by model and firmware.
Compatibility is unverified; USB-C alone does not establish support.
MANAGE YOUR Multi-Cam RIG
Save network, switcher, and camera settings for future productions.
Each WCC maintains its own camera connection, independently of the GUI host.
Reorder camera panels, download diagnostics, and update paired units from one GUI.
Join the production 2.4 GHz Wi-Fi, select the ATEM IP address, and set the ATEM Camera ID.
No. The ATEM is hardwired to the same Ethernet network switch as the 2.4 GHz Wi-Fi access point.
No. Each WCC continues Camera Control without a GUI, even if it closes or crashes.
One WCC unit per wireless camera.
Range depends on the Wi-Fi network and the same factors that affect any Wi-Fi connection, including access point placement, obstructions, interference, and antennas.