Atomic ImagingATOMIC IMAGING

Purpose-built for the Blackmagic URSA Broadcast G2 camera and Blackmagic ATEM switchers (all models) for Multi-Cam live production.

Introducing the Atomic Wireless Camera Control Unit.

Wireless camera Tally, Iris, and Camera Control via ATEM Software Control and/or ATEM Camera Control Panels. All through one USB-C connection to the camera—no separate power supply required.

Automatic camera configuration. Plug and play once the unit joins the same production Wi‑Fi network as your ATEM switcher.

Runs standalone—no additional computer or software required. The optional web-based GUI provides diagnostics, individual and global Remote Recording, Clean Feed, False Color, and camera preview with Waveform and Vectorscope options.

View multiple units in one GUI, hosted by a WCC unit or a computer (works on both Mac and PC). Both GUIs also provide recording, Clean Feed, and False Color controls for cameras hardwired to the ATEM, across supported outputs.

BUILT FOR WIRELESS HANDHELD OPERATION

Know when you’re live.

Handheld operators can’t hold a shot indefinitely. Clear Tally lets them know when they’re live—and when they can reposition.

Atomic WCC complements URSA Broadcast G2 cameras using wireless video systems such as Teradek Bolt. Bolt carries video to the switcher; WCC provides the return Tally, Iris, and Camera Control.

AUTOMATIC SETUP. OPTIONAL CONTROL.

Ready for the show.

Automatic Configuration

Automatically configures the camera & streaming settings and imports the XML profile directly from the WCC unit (no downloads or file transfers necessary). Then it’s ready to go.

Clear camera labels

Use ATEM source names or set your own camera labels.

Useful diagnostics

Monitor connections, signal strength, address conflicts, and camera assignments in one GUI.

THE ADJUSTMENTS THAT MATTER

Wireless Tally, Iris, and Camera Control.

Adjust supported camera settings from the control position while the camera operator concentrates on framing.

Note: Iris operation depends on the lens and camera configuration.

FROM SETUP TO SHOWTIME

Connect. Join. Control.

1

Connect the WCC

Mount the unit and connect it to the camera’s rear USB-C port.

2

Join production Wi-Fi

Use Config Wi-Fi to select your production network. Connect the ATEM to that network by Ethernet.

3

Select ATEM and Camera ID

Find your switcher, match the Camera ID, and apply. Camera configuration and streaming start automatically.

Note: Video transport and talkback require separate devices.

CHOOSE THE RIGHT CONNECTION

Purpose-built for wireless ATEM control (all models).

ApproachWhere it fitsWhy choose Atomic WCC?
SDI return controlWired return video and Camera Control.Wireless Tally and Camera Control without an SDI return cable.
Streaming Bridge workflowDecode supported video streams to SDI/HDMI.Dedicated camera-side Wi-Fi control; video transport remains separate.
Middle Things APC-RNetworked DJI gimbal control and supported Blackmagic Camera Control through Middle Control.Direct URSA Broadcast G2 + ATEM control, with no separate control computer required.

Alternative product references: Blackmagic Design · Middle Things. Features and requirements vary by model and firmware.

Purpose-built for URSA Broadcast G2.

BUILT AND TESTED BY ATOMIC

Blackmagic URSA Broadcast G2

EXPECTED COMPATIBILITY · NOT YET TESTED

Other Blackmagic cameras

  • Blackmagic Cinema Camera 6K
  • Blackmagic PYXIS 6K
  • Blackmagic Studio Camera 4K Plus G2
  • Blackmagic Micro Studio Camera 4K G2

Compatibility is unverified; USB-C alone does not establish support.

MANAGE YOUR Multi-Cam RIG

One view. Individual camera connections.

Saved Locations

Save network, switcher, and camera settings for future productions.

Independent control links

Each WCC maintains its own camera connection, independently of the GUI host.

Practical maintenance

Reorder camera panels, download diagnostics, and update paired units from one GUI.

Contact

Email

(312) 649-1800 · Support extension 5701

Quick answers.

Where can I buy it?

Direct from Atomic Imaging.

Buy Now

What is the initial configuration?

Join the production 2.4 GHz Wi-Fi, select the ATEM IP address, and set the ATEM Camera ID.

Does the ATEM need Wi-Fi?

No. The ATEM is hardwired to the same Ethernet network switch as the 2.4 GHz Wi-Fi access point.

Does the GUI need to stay open? What if it crashes?

No. Each WCC continues Camera Control without a GUI, even if it closes or crashes.

How many units do I need?

One WCC unit per wireless camera.

What determines the range?

Range depends on the Wi-Fi network and the same factors that affect any Wi-Fi connection, including access point placement, obstructions, interference, and antennas.